Turf cutter
2 Sizes available
Lrge Turfcutter
The RYAN Jr. Sod Cutter has been the gold standard in the golf, rental and commercial industries for more than 50 years and remains the heavy-duty unit of choice today. The new The RYAN Jr. sports a host of new features, including reduced hand/arm vibration, cut by a remarkable 75 percent for more comfortable operation. A new pneumatic rear castor wheel with lockout allows for cutting around curved landscape features or straight strips with unmatched precision. A true workhorse, the Jr. Sod Cutter packs the speed, convenience and reliability you’ve come to expect from RYAN.
- Clutch: Spring-loaded belt tightener
- Cutting Thickness: Adjustable to 2.5" (64 mm)
- Cutting Width: 12" (305 mm)
- Displacement: 9.9 cu. In. (163cc)
- Drive System: A-section V-belt engine to gear case; double roller chain to blade eccentric shaft; gears and roller chain to traction wheels; transmission has separate dog clutches to engage cutting blade and traction drive
- Drive Wheels: Two 8 in. (203 mm) diameter; knobby-tread; rubber-vulcanised to cast-iron hubs
- Engine: 4-cycle Honda GX160; recoil starter; on/off switch; low-oil alert
- Fuel Capacity: 0.82 gal. (3.1 L)
- Height: 1016 mm (40")
- Horsepower (@3,600 rpm): 5.5hp (4.1 kW) @ 3,600 rpm (gross horsepower as rated by the engine manufacturer as per SAE J1995 Standards).
- Length 1346 mm (53")
- Lubrication: Oil splash in gear case
- Oil Capacity: 0.61 qt. (0.58 L)
- Speed: Up to 41m/min. (135 ft./min)
- Weight: 151 kg (333 lb)
- Width 635 mm (25")
- Please Note: Specifications subject to change without notice.
Small turf cutter
There’s simply no sod cutter that’s easier to use. Just set the depth, shift into gear, engage the blade, start the drive and you’re off!
And the SC weighs only 161 pounds – that’s half the weight of other models on the market. This rugged compact machine makes cuts 12” wide and up to 1.38” deep. The small frame and light weight make maneuvering easy, even in tight spaces. Special rubber pads and isolation mounts reduce vibration to exceptionally low levels.
Note: Prior to using this machine, make sure to soften the turf by watering. A good ‘Rule of Thumb’ is, prior to cutting, insert your thumb into the watered sod to the first knuckle to ensure the ground is soft. Cutting into hard, dry ground can cause damage to the machine.
